In addition to ServoTrends (Galil's quarterly news letter), Galil also provides What's New At Galil. This informational letter will keep you up to date on everything Galil on a monthly basis! It will contain information about our new and exciting products, enhancements to existing products, training announcements, and technical motion control articles. If you are already registered for the ServoTrends news letter you will be receiving the What's New At Galil news letter as well. If not register now to receive your free copy via email!
Galil is proud to introduce a new “all in one” multi-axis drive for the DMC-41x3 and DMC-40x0 product families. This all in one drive module is perfect for customers who want have the ability to use one configuration in multiple applications or mix and match motors on the same bank of drives. This drive is available in 2 and 4 axis configurations.
Monitoring and troubleshooting real time motion control systems can be tricky in high performance applications where the majority of PC and controller resources are dedicated to running the application. Adding on an extra layer of monitoring software can have a non negligible effect on the overall system performance and can in some instances eliminate or worsen the behavior you're looking to monitor. The ability to remotely monitor communications and status in real time from a separate PC is invaluable in these situations. Enter gcaps Remote Connect!
Introducing the latest addition to Galil's software suite, the MotorSizer tool. This powerful tool offers a straightforward method of selecting the proper motors for a particular application with the same ease of use GDK is known for. The tool asks for various application details such as load mass and top speed, then provides a list of motors carried by your local Galil distributor with the appropriate motors highlighted. You can use this list to narrow down your search for motors and contact your distributor for more details.
Stepper motors are employed in a variety of applications across the engineering spectrum because they are inexpensive, simple to operate, and offer high torque at low speeds. The primary drawbacks of stepper motors are lack of position feedback and stalls; the user assumes that the stepper 'got there.' The addition of an encoder to the system can mitigate these drawbacks but at the cost of increased move and settle time. Galil's new Closed Loop Stepper Firmware overcomes these drawbacks while keeping move and settle times low. The result is precise motion and positioning with the low speed/high torque benefits of a stepper motor.