Skip to main content

Motion Controllers

Galil leverages decades of experience and technological innovation to provide motion controllers for customers across a wide range of industries. Our full product offering allows you to select the best motion controller for your specific application. Choose from single-axis or multi-axis, bus-based or stand-alone, box-level or card-level, and external drives or integrated drives. All of Galil’s motion controllers and drives are backed by a fully trained application engineering team.  If our standard motion controllers don't meet your requirements we will cost-effectively make one that does.  Our description of motion controller customizations will give you examples of modifications we have made to meet our customers motion requirements.

Multi-Axis Controllers

DMC-40x0
Ethernet/RS232 Multi-Axis Motion Controllers, 1-8 axes
DMC-41x3
Ethernet/RS232 Econo Motion Controllers, 1-8 axes
DMC-500x0
EtherCAT Master Multi-Axis Motion Controllers, 1-8 axes EtherCAT/1-4 axes Local
DMC-52xx0
EtherCAT Master Multi-Axis Motion Controllers, 2, 4, 8, 16, or 32 axes
DMC-42x0
Ethernet/RS232 Multi-Axis Motion Controller, 1-8 axes, DMC-40x0 Performance with DMC-2xx0 Connectivity
DMC-21x5
Ethernet/RS232 Econo Motion Controllers, 1-8 axes
DMC-18x6
PCI Multi-Axis Controllers, 1-8 axes
DMC-18x2
PCI Econo Motion Controllers, 1-4 axes

Single-Axis Controllers

DMC-3x01x
Ethernet/RS232 Single Axis Motion Controller

Prior Generation Motion Controllers

DMC-21x3
Ethernet/RS232 Econo Motion Controllers, 1-8 axes
DMC-14x5
Single and Dual-Axis Motion Controllers With Ethernet/RS232
CDS-3310
Ethernet/RS232 1-axis Motion Controller and Drive
DMC-18x0
PCI Optima Motion Controllers, 1-8 axes
DMC-10x0/DMC-15x0
RS232/ISA Legacy Series 1-8 axis

Estimated End-Of-Life for Controllers - updated November 2021


These motion controllers and PLCs are still in production and will end-of-life in the number of years specified in the table below.

Controller

Introduced

Estimated End-of-Life

New Equivalent

DMC-14x5

October 1999

3 to 5 years

DMC-30010

DMC-15x0

October 1994

until existing stock runs out

DMC-41x3

DMC-1810 - DMC-1840

March 1999

1 year

DMC-18x6

CDS-3310

October 2004

2 to 4 Years

DMC-30012

DMC-21x2

June 2002

until existing stock runs out

DMC-21x3

Obsolete Products