DMC-41x3 | Galil

May 2020

The new AMP-435x7 all in one multi-axis drive!

by Galil_MarkM

Galil is proud to introduce a new “all in one” multi-axis drive for the DMC-41x3 and DMC-40x0 product families. This all in one drive module is perfect for customers who want have the ability to use one configuration in multiple applications or mix and match motors on the same bank of drives. This drive is available in 2 and 4 axis configurations.

Jun 2018

New 1.3 Firmware Release

by MattK

Galil Continues to Innovate with the New 1.3 Firmware Release

Galil announces the latest advancements to it's current generation of multi axis motion controllers, the 1.3 release for the DMC-40x0 and DMC-41x3. This firmware release includes a number of speed enhancements and optimizations in addition to adding support for new hardware and software features that will allow system builders to greatly reduce development time and cost. Getting motors moving and your application to market using a Galil Controller and Amplifiers has never been faster or easier.

Jan 2016

Modbus Enhancements for the DMC-40x0, DMC-42x0 and DMC-41x3

by ambere

Galil has introduced Modbus slave support for the following controllers: the DMC-40x0, DMC-42x0, and DMC-41x3. These controllers now have the option of being either a Modbus master or slave.

Jun 2014

The DMC-40x0 and DMC-41x3 Now Have Twice The Program Memory!

by annk

Galil is pleased to announce our latest firmware release, revision 1.2, for the DMC-40x0 and DMC-41x3. This release provides an increase in program memory from 2000 x 80 characters to 4000 x 80 characters, and an increase in the total array elements from 16,000 to 24,000.