DMC-1411
PC/104 1-Axis Motion Controller
For new applications, Galil recommends the new generation DMC-3x01x series single-axis controllers. The DMC-1411 is an economical 1-axis motion controller for the PC/104 Bus. The DMC-1411 features an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ecam. Like all Galil controllers, DMC-1411 programming is simplified with two-letter, intuitive commands and software tools for servo tuning and analysis.
Features
- For new applications, Galil recommends the new generation DMC-3x01x series single-axis controllers.
- PC/104 bus format
- Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
- PID compensation with velocity and acceleration feedforward and integration limits
- Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
- Multitasking for concurrent execution of two application programs
- Memory for application programs, variables and arrays
- Accepts inputs from two encoders for gearing or dual-loop applications
- 7 Uncommitted digital inputs, 3 digital outputs
- High Speed position capture
- Forward and reverse limits and home input
- 40-pin IDC connector
- Custom hardware and firmware options available
| Part Number | Description | 1 pc | 100 pc |
|---|---|---|---|
| DMC-1411 | PC/104 1-axis | $595 | $395 |
| ICM-1460 | Interconnect module | $155 | $100 |
| ICM-1460-OPTO | ICM with optoisolation | $205 | $150 |
| Image | Part Number | Description |
|---|---|---|
| CABLE-40-PINRIBBON | 40-pin cable for DMC-1411 |